Die sicherheitsrelevanten Funktionen der Bauteile und Optionen sind nicht immer offensichtlich. Other trademarks are the property of their respective owners. Class I laser products are not considered to be hazardous. To run the Flash Test: Infrared Standard Infrared port, if available.

Uploader: Vizuru
Date Added: 11 October 2009
File Size: 15.94 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 37953
Price: Free* [*Free Regsitration Required]

Repair or replace as necessary. Check for signs of the envelopes being stuck together or signs of glue. Use the service error codes, user status messages, user error messages, service checks, and diagnostic aids to determine the printer problem and repair the failure.

Try all the other input paper sources to make sure they are properly feeding paper. Paper feed problem with Sheet Paper Tray Option. Tray 5, Tray 4, This indicates it is the margin value being changed.

Lexmark Optra T T, T, T, T Service Manual |

If correct, replace the top optical sensor assembly. Other trademarks are the property of their respective owners. If the deflector is bowed or not fitting correctly, replace the deflector. All output bins installed on the printer are shown on the feed test menu. When a Paper Lexmadk Check Bin 4 message displays, a problem exists with the top pass thru sensor assembly or the control board.


Remove the paper from tray x and check for the natural curvature in the paper. Clean with a soft cloth or replace the ldxmark and lamp assembly which are provided together in a kit. Upper Paper Deflector Assembly.

Lexmark Optra T Overview – CNET

The customer may try to improve the print quality by increasing the transfer setting. If information is written to flash memory and to disk at the same time, the Program Flash message is displayed. Measure the voltages from J10 to printer ground.

Network Card Option Note: Flash operations are not allowed until the flash is formatted. Close and evenly spaced repetitive marks A sheet of paper may still be over the sensor or the flag is still activated. If these steps do not resolve the problem, replace the code overlay SIMM and download the emulation again.

If the printer recognizes any of the output options, the base printer autoconnect system is operating correctly.

Lexmark Optra T612 and T612n

Reload the paper and POR the printer. A cheap and charming color laser printer A cheap and charming color laser printer by Dan Ackerman. The printhead used in the printer does not have a mechanical shutter as previous laser printers. The cartridge is easily identified by the smart chip located on the top right side of the cartridge.


A service error indicates the wrong fuser lamp is installed in the printer and does not match the one stored in the printer code.

If incorrect, replace the defective cable. The motor never reached the correct operating speed.

If incorrect, replace the compensator assembly cable. Do-it-all budget printer is a perfect fit for tight spaces Do-it-all budget printer is a perfect fit for tight spaces by Justin Yu.

If incorrect, replace the engine board. When the sensor is closed CL displays, and when the sensor is open OP displays.